![background image](http://html1.mh-extra.com/html/triax/tmb-200/tmb-200_manual_1160776005.webp)
Programmable Multiband Amplifier
TMB 200 & TMB 200S
4
awi -july 14
TMB 200-V1
An external keypad and display is used to setup the unit. A USB cable is used to connect the unit and the
keypad.
When the unit is powered on:
the programme mode is in standby:
by default, the system is configured as follows:
o
UHF1
3 UHF filters
o
UHF2
0 UHF filters
o
UHF3
7 UHF filters
all the UHF filters are deactivated (display "
- -
"),
the attenuators are at zero.
Factory reset
If necessary, to revert to factory settings, follow the procedure below:
The unit erases all the programming parameters and switches to standby mode.
Settings
/ Config
Menu
Factory
Reset
Firmware
14a23
p
p
p
p
Menu
Firmware
upload
p
p
Factory
wait
Running through the menus (
^
)
Running through the menus
(
V
)
- Select the value "
-
"
- Select the value "
+
"
- Save the value