![background image](http://html1.mh-extra.com/html/triax/t2-hd-217-pvr/t2-hd-217-pvr_operating-manual_1160820023.webp)
Basic Adjustment
General
23
Auto Standby
Power Save in Standby Mode
This function allows you to automatically switch
the Receiver into standby mode when there is no
user activity for 3 hours.
This function allows you to control the power
saving features of your Receiver.
Item
Item
Item
Item
Item
Enabled
The Receiver will automatically switch
(default)
into standby mode when there is no user
activity for 3 hours.
Automatic
The receiver will automatically install
software upgrades when available
Always
Whenever new services (channels)
Start
are detected, the Receiver will
automatically tune and store them.
All
All messages are displayed.
None
No messages are displayed
Information
Only information messages are
Messages
displayed.
No Minor
Only major messages are displayed.
Messages
Always
Whenever new services (channels)
Ask
are detected, a message will appear
on screen. You can choose to tune
and store the new services or cancel
the auto retune.
Manual
The receiver will display a message
allowing you to confirm or cancel
the software upgrade
Enabled
The Receiver uses a very low amount of
(default)
power when in standby.
Disabled
The Receiver will remain on constantly
unless switched into standby mode by
the user.
Disabled
Power saving features are disabled.
This function allows you to control when software
upgrades are installed.
This function allows you to control when new
services (channels) are added and stored on
the Receiver.
This function controls when retune messages
are displayed.
NOTE
•
During the digital switchover, Auto retune
messages may be displayed. Follow the on-
screen instructions to retune.
Upgrade Software
Auto Retune
Auto Retune Messages
Summary of Contents for T2-HD 217 PVR
Page 34: ...Notes 34 ...
Page 35: ......