![background image](http://html1.mh-extra.com/html/triax/st-hd-537/st-hd-537_operating-manual_1160903009.webp)
Quick Guide
Before turning on the power
Initial auto installation
When the Receiver is powered on for the first time, the
First Time Installation
screen appears.
Follow the on-screen instructions to search for all available channels.
1
Ensure the antenna cables are connected before switching on.
2
Switch on the power socket.
3
Press on the Receiver or Remote Control.
•
The First Time Installation screen is displayed.
4
Press OK to start the channel search.
•
The Receiver will search for, sort and store all receivable channels.
NOTE
•
The First Time Installation process will be
aborted if the Receiver is left unattended
for more than 30 minutes before searching
for channels.
•
After the First Time Installation has been
completed, the default PIN is automatically
set to ‘0000’. To change the PIN setting,
refer to Page 21.
1
Connect the antenna (Coaxial Plug), 75ohm coaxial
cable, (CAI Benchmarked cable such as Triax TX100)
2
Connect the satellite dish (F-Type Plug), 75ohm coaxial cable,
(CAI Benchmarked cable such as Triax TX100)
3
Connect the HDMI cable
4
Connect the power adaptor and switch on at the socket
9
1
3
2
4
Please connect aerial and /or satellite dish
Then press to scan for services
First Time Install
OK
Summary of Contents for ST-HD 537
