![background image](http://html1.mh-extra.com/html/triax/st-hd-537/st-hd-537_operating-manual_1160903024.webp)
Basic Adjustment
Manually tuning channels
24
Manual Terrestrial Tune
You can manually tune for new Terrestrial and
Satellite channels after the first time installation
has been completed.
Item
UHF Channel
Select channel 21-68
Frequency
The frequency of the service
(channel) you are manually tuning.
Bandwidth
The bandwidth of the service
(channel) you are manually tuning.
System
The type of tuning system.
DVB-T = SD (Default)
1
Select Manual Terrestrial Tune.
2
Press
/
to select the desired UHF
channel.
3
Press
to select ‘Frequency’ (kHz).
4
Press
/
to adjust the frequency.
5
Press
to select ‘Bandwidth’.
6
Press
/
to adjust the bandwidth.
7
Press
to select ‘System’.
8
Press
/
to select a system.
9
Press the
button to start scanning for
the specified channel. If the channel is
found it will be stored in the Receiver and
will be available in the channel list and EPG.
1
Select Manual Satellite Tune
2
Press
to select ‘Frequency’ (kHz).
3
Press
/
to adjust the frequency or type
required frequency using the keypad.
4
Press
to select ‘Symbol Rate’.
5
Press
/
to adjust the Symbol Rate, or
required symbol using the keypad.
6
Press
to select ‘LNB Polarisation’.
7
Press
/
to adjust the LNB Polarisation.
8
Press the
button to start the scanning
process.
NOTE
•
You can enter the UHF channel and frequency
using the 0-9 numeric buttons.
This function allows you to perform a first time
installation.
1
Press
Menu
on your remote control
2
From the Menu options on screen,
select
Settings
3
Then select
General
4
Use the navigation buttons to highlight
First Time Installation
5
Press
OK
to select.
6
A warning banner will be shown.
Press
OK
to proceed or exit to cancel.
7
Press
OK
to scan for new services.
You may have to wait a several minutes
for the scan to complete.
8
You will receive a message to confirm when
installation is complete.
9
Press
OK
to start watching TV
Manual Satellite Tune
First Time Installation
Manual Tune
Select
OK
Start Scan
Exit Menu
EXIT
Frequency (MHz)
Symbol Rate
LNB Polarisation
Signal Strength
Signal Quality
04796
26006
Horizontal
FEC
Network ID
Services Found
5/4
20
7
Transport ID
Services Added
7FE
7
Summary of Contents for ST-HD 537
