![background image](http://html1.mh-extra.com/html/triax/mod-102t/mod-102t_user-manual_1160870002.webp)
Introduction
The MOD102T modulator has an HDMI input with local loop through, and a COFDM
output which is combined with the RF input. The HDMI input content can be supplied by
a number of sources, Blu-ray player, Satellite Set top box, CCTV etc. The input signal is
modulated as a COFDM output and can be distributed to a number of TV’s over an
existing private coaxial network.
It has an HDMI loop through, to connect to the local TV, and can also combine existing
RF with the modulated output channel on RF Out 1 and RF Out 2. The modulator has
adjustable level control to balance the COFDM channel with the incoming RF channels.
The source Set top box can be controlled from another TV location, via the IR remote
control over the coaxial cable, using an IR transmitter and a digital link. The coaxial
network must be connected to the RF Out 2, with the 9vdc able to pass through the
network, to remotely power the digital link.
The MOD102T Modulator can be set up, either via the front panel and LCD screen, or
through the Web user interface (RJ45 connector). Please see below for full instructions.