![background image](http://html.mh-extra.com/html/lemco/hdmod-6s/hdmod-6s_quick-start-manual_1874791001.webp)
HDMOD-6S
Quick start guide
4-step installation guide
The HDMOD-6S can be programmed on the field using the following simple 4 steps*:
1
st
Step
Power up the HDMOD-6S by adding the external power supply. The HDMOD-6S
will need 20-30secs to initialize itself. The SSD (Seven Segment Display – No
2
)
depicts the initialization status.
2
nd
Step
Choose “
Chanel mode
” by pressing the Channel/Profile button (No
1
) and select the
output RF channel using the Up/Downs buttons.
3
rd
Step
Choose “
Attenuation mode
” by pressing the Channel/Profile button (No
1
) and select
output attenuation ( 0dB, -10dB, -25 dB) using the Up/Downs buttons.
4
th
Step
Choose “
Profile
mode
” by pressing the Channel/Profile button (No
1
) and select
Profile number using the Up/Downs buttons. Each modulator must have its unique
profile number in the same CATV installation.
For example, select:
Profile
No 1
for the first modulator
Profile
No2
for the second modulator
…
Profile
No10
for the 10
th
modulator etc…
*The HDMOD-6S offers advanced programming features from a PC software via a USB interface.