![background image](http://html1.mh-extra.com/html/triax/ifa-284/ifa-284_manual_1160772006.webp)
6
Strip the end of the antenna cable as shown in
the figures.To prevent interference to your TV
picture ensure that none of the fine threads of
the outer sleeve touch the inner copper wire
6.5
mm
6.5
mm
Stripping cable for the F-connector
Signal out
IFA 284 has four signal outputs. IFA 288 has 8 signal outputs.
The amplifiers use self- terminated output connectors which eliminates the
need for additional termination of unused outputs.
Assemble an F-connector at one end of the
cable at the amplifier’s input
.
Remember to read the instructions about
assembling connectors.
The pre-assembled cable with F-connectors
Distribution
Run cable from the amplifier outputs, labelled
, to the required location of
your TV or radio. You may choose to use an IEC connector for direct connec
-
tion to a TV (IEC male) or FM radio (IEC female), or you may end in an antenna
socket from which you can connect a TV or radio via a connection cable. The
end of the distribution antenna cable, which is connected to the amplifier, must
be fitted with an F-connector (as shown previously) and attached to the ampli
-
fier output(s)
.
Remember to read the instructions
regarding assembling connectors.
3
mm
13
mm
Stripping the antenna cable to assemble
the IEC connector.
Mounting instruction
TRIAX IFA 284/288
distribution amplifiers
EN