![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864012.webp)
- 12 -
CCS-2 1002
3.5 r
etrofit ting
a
Ca
module
The cassette is equipped with a common interface. It allows you to connect a
CA module for various scrambling systems and service providers. Scrambled
channels can only be descrambled with a CA module suitable for the scram-
bling system and the corresponding smart card. The smart card contains all
the information for authorisation, descrambling and subscription.
Caution
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for decoding several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
–
Any changes made by programme provider to the structures in the pro-
gramme data might impair or even prevent this function.
– When working with the CA module, please read the corresponding operat-
ing manual from the respective provider.
• Insert the smart card into the CA module so that the chip
3
on the smart
card
1
faces the thicker side (top) of the CA module
2
.
• Insert the CA module into the slot
4
with the top side of the CA module
facing the RS-232 socket of the cassette.
• Push the CA module without canting into the guide rails of the CA slot
4
and contact it to the common interface.
3
4
1
2