- 24 -
CCE 210
Data rate of the video signal
You can use this menu to set the data rate at which the video signal is to be
encoded. The higher the data rate, the higher the quality of the transmitted
video signal.
AV 1
/2
5 Mbps
BITRATE
• Use the
buttons to set the data rate of the video signal
("
2.0"
… "
14.0"
Mbit/sec). If only audio signals are to be encoded, set the
data rate to "
Audio only
". In setting "
Off
" the input is switched off.
• Press the
button.
—> The "Video signal type" – "
INPUT
" submenu is activated.
Video signal type
You may set whether you would like to input a video composite signal "
Compos-
ite
" (CVBS) via the yellow Cinch socket or a S-video signal "
S-Video
" (Y/C) via
the Mini DIN socket in this menu.
AV 1
/2
Composite
INPUT
• Use the
buttons to set the desired type of video signal.
• Press the
button.
—> The "TV standard" – "
NORM
" submenu is activated.