7
Below you can see an empty headend unit without the front and top.
TDX Unit
RF output
Distributes the RF channels from the output modules
using an F-connector.
Test point -20 dB
RF test point of output (-20 dB).
Configuration port
Ethernet configuration port for setting up the head-
end system. Connector type is RJ-45 and cable type
is Cat7. Use a computer/laptop with the software
recommended below to configure the system.
Recommendations:
Operating system: Windows XP or above.
Browser: Windows Internet Explorer version 6.0 or
above.
Additional software: Microsoft© Silverlight Runtime
version 3.0 or above.
Aux 1 & 2
For future use.
Unit link 1 & 2
Connects the main unit with subunits 1 and 2.
Unit ID switch
Switch for setting the ID of the main unit and the two
subunits.
Note
When you attach F-connectors to the RF
output and Test point sockets you have to be
very careful when you tighten the F-connec-
tors or you may destroy the sockets.
Secure Digital (SD)
card
Memory card for storage of the system configura-
tion. Placed in a slot behind the front cover.
Summary of Contents for 492090
Page 1: ...GB 891072E TDX Headend Unit Art No 492090 User guide...
Page 58: ...58 Your notes...
Page 59: ...59 Your notes...
