
Sink EDID
CEC Command
Deep Colour Set
Exit
Source Infoframe
Audio Return
Option
Description
Block Data
To check the sink Block 0 and Block 1’s EDID table
Description
To check the sink description of EDID
Option
Description
Standby
To set the source to standby mode
Active Source
To turn on the source
Monitor
To detect the command data on the CEC bus
Option
Description
8-bit
On/Off
10-bit
On/Off
12-bit
On/Off
Option
Description
AVI (AVI Infoframe Data)
To check the source video infoframe packet
AUD (Audio Infoframe Data)
To check the source audio infoframe packet
Option
Description
Audio Return
On/Off
Note: the device will auto-detect the sink device’s ‘Deep Colour’ setting and if any of the
settings are not supported, the option in the Deep Colour set will not be selectable.
Select to exit the main menu.
8
OLED Display
1. SAMPLING RATE:
The Analyser supports audio sampling rates of 48/96/192kHz, the display will show the
signals current sample rate. If external audio is selected the OLED will display
‘BYPASS’.
2, AUDIO CHANNELS:
The Analyser supports audio channels from LPCM 2, 5.1 and 7.1 CH. If external audio
is selected the OLED will display ‘BYPASS’.
Note: When the audio button is held down for 3 seconds, both 1 & 2 will show AUDIO
MUTE.
3. ARC:
Audio Return Channel, when this function is selected the OLED display will show ‘ARC’
ID when an ARC signal is present.
4. V TIMING:
Please refer to the Timing Table on Page __ for details of the supported timing and V
sync.
5. H TIMING:
Please refer to the Timing Table on Page __ for details of the supported timing and H
sync.
6. 3D FORMAT:
Only when the 3D pattern is selected, the OLEDdisplay will show the pattern details.
Note: When in EXT Mode, the OLED display will show the input H/V Sync with the
timing frequency and 3D pattern if any.
9