Top Panel
1. POWER:
Press the power button to turn the
device On/Off the LED will turn Blue
when powered On, and Red when in
standby mode.
2. INT/EXT:
Press this button to toggle between
the built-in internal pattern generator
and the external source device. The
LED will turn Blue when the external
input is selected. To retrieve the
external EDID information, an external
source device must be connected;
otherwise the device will only
generate the test patterns to display
on the TV/Monitor.
3. PC/HD/3D:
Press this button to cycle through the
test patterns (PC/HD or 3D timings).
The OLED display will show the timing
currently selected.
4. AUDIO:
Press this button to select the audio
sample rate from LPCM 2CH, LPCM
5.1CH and LPCM 7.1CH 48kHz or
LPCM 2CH, LPCM 5.1CH and LPCM
7.1CH 96kHz or LPCM 2CH and
LPCM 5.1CH 192kHZ.
Note: Press and hold the Audio
button for 3 seconds to select the
Audio mute function.
5. M :
Press this button to enter the main
menu and/or to confirm the selection.
6. PATTERN (UP/DOWN):
Press these keys to select the patterns
or when in OSD mode, press these
keys to select the option.
7. TIMING (UP/DOWN):
Press these keys to select the required
timings.
8. OLED DISPLAY:
This displays the relevant information
about the attached devices.
Please see section __ for details.
2
3
4
5
6
7
8
1
6
