How to use TAM System Explorer
Working with Tama Programs
described in section 3.5.1
.
Remark
Remark
When a persisted
Tama program
is replaced with a new
Tama program
, the steps de-
scribed in section 3.5.1 have to be executed again, to persist the new
Tama program
.
A persisted
Tama program
will automatically be loaded after a restart of the device but remains dis-
abled after restart by default. To automatically enable a
Tama program
at start-up set the register
Gen-
eral.Parameters.EnableAsynchronousTama
or
General.Parameters.EnableIsochronousTama
to TRUE.
3.7.4 Saving a Tama Program in a TAM Configuration File
When the configuration is saved (see section 3.5.2) while a
Tama program
is loaded, the assembly is
also saved to the configuration by default.
3.8 Global Keys
The following keys are always active when TAM System Explorer is active.
Key
Effect
F5
Start/Stop Scope
F12
Emergency switch off all power sections. You may also click the
button located on
the left of the axis monitor.
Caution
Caution
Switching off the power section of a drive during motion may damage the axis.
Pause/Break Emergency Stop of all active axes. You may also click the
button located on the left
of the axis monitor.
ServoDrive-SetupGuide_EP018
2022-08-25
29
/
83
