pg. 6
- Triad InCeiling R-Series Quick Start Guide
Triad InCeiling R-Series Quick Start Guide -
pg. 3
TABLE
OF
CONTENTS
2
8
9
Locate the area where the speaker will be placed in the wall or ceiling, keeping
in mind that when the speaker is installed, it may take up the full ceiling cavity
within the NCB location (keep free from electrical wires, HVAC, and plumbing).
Position the bracket beneath the two joists so the flange protrudes down for
drywallers to sheetrock around.
NCB : R5, R6, and R8
NEW CONSTRUCTION INSTALLATION
1
Attach New
Construction
Bracket (NCB)
Wings before use.
flange
RETROFIT AND WIRING INSTALLATION
cont.
7
Adjust the tweeter level
switch on the back of the
speaker to
-3dB, 0dB, or +3dB
if desired.
Insert the
speaker into
the hole.
(A) Tighten the four Phillips screws located on the speaker’s front
baffle (see drawing below) to rotate and tighten the dogs to the
sheetrock. (B) Dogs will move outward and tighten to secure speaker
to sheetrock.
3
7
2
2
Installation
New construction, retrofit, and wiring
Speaker grill installation and removal
Features
Message from Triad
Finish care and custom painting
Specifications
InCeiling R-Series
BC
Ins
talla
tion
A
B
Information
Tuning and warranty
7
