Page 4
Page 5
Collar Light
(“Fuel Gauge”)
Flashes twice per second
every four seconds when the
collar is turned on.
This light will be:
Green when the batteries are full.
Amber when the batteries are partly
discharged.
Red when the batteries need charging
very soon.
Rapid red flashing means the batteries
are completely dead and the unit will
not function. Note that it takes 20
seconds after collar turn-on for the
light to register battery level.
Collar Strap Retaining Loops
(“Belt Loops”)
Insert the leather collar strap through
all three belt loops and snug the strap
against case.
Battery Pack Access Screws
Remove these two screws to remove the
battery pack. Position the new pack in
place and replace the screws. (Note:
The battery pack does not need to be
removed for charging.)
Permanent antenna
Light
Intensity dial
(10 levels)
Buzz button
(sound only, no stimulation)
Horse selector dial
(horse 1, 2 or 3)
Medium stimulation button
Low stimulation button
Lanyard attachment point
FEATURE GUIDE
ViceBreaker
®
H2 Transmitter
Very important: Do not remove or
tamper with the receiver serial number
label that is visible when the battery
pack is removed. Doing so will void
your warranty. This label is a seal that
maintains waterproof integrity of
the collar.
The collar is waterproof.