www.ttco.com • 800-237-0946
2-111
2
S
pecialty
Application Photoelectric Sensors
Clear Label Sensor
How to Specify
Features
OUTPUT INDICATORS
Red LED illuminates when when outputs are
ON
Flashes when short circuit or overload
detected
AUTOSET/GAP
_
BUTTON
1. Push and Hold with gap in view for 2
seconds for AUTOSET.
2. Tap for UP on Contrast Indicator, or reduce
threshold.
3. Change settings in MENU options
AUTOSET/LABEL
+
BUTTON
1. Push and Hold with label in view after GAP
AUTOSET on rare occasions when labels
have multiple layers.
2. Tap DOWN on Contrast Indicator, or
increase threshold.
3. Change settings in MENU options
OLED NUMERICAL DISPLAY
1. 1 to 10 bar Contrast Indicator
2. Numerical display for threshold and
feedback number
3. Options Status Display: Button Lock or
Unlock ( ); auto adjust on/off (AUTO);
output in Gap( ) or on Label ( ).
4. View Menu Options
MENU BUTTON
1. Push and Hold for 1 second to enter Menu
Options.
2. Tap to scroll through Menu options.
3. Hold during power up for additional Menu
Options; Timers and Factory Diagnostics (or
sensor scope).
1.
Select Sensor:
Ultrasonic Clear Label Sensor
2.
Select Cable or Connector:
Blank = 6’ (1.8m) Cable
C = Connector M12, 5-Pin
(Standard)
3.
Select Connector Type:
-1 = Standard M12 Connector
(see #2).
Includes both NPN and PNP
-1M8 = M8, 4-Pin Connector
NPN/PNP Software Selectable
-1M8LE = Wired like LERC
Ultrasonic Clear
Label Sensor
Blank = 6’ Cable
C = Connector
-1
-1M8
-1M8LE
Example:
CLS C -1
Hardware & Accessories
CLS-GP
Gap Plate
NOTE: The M12 version is not wired the same as LERRC-M12.
GEC-6
6' (1.8m)
GEC-15
15' (4.6m)
GEC-25
25' (7.62m)
RGEC-6
6' (1.8m) right angle
RGEC-15
15' (4.6m) right angle
RGEC-25
25' (7.62m) right angle
4-Wire Nano Cable, M8
GEX-9
9’ (2.7m) Extension
GSEC-6
6’ (1.8m)
GSEC-15
15’ (4.6m)
GSEC-25
25’ (7.62m)
GRSEC-6
6’ (1.8m) right angle
GRSEC-15
15’ (4.6m) right angle
GRSEC-25
25’ (7.6m) right angle
GX-25
25’ (7.6m) extension
5-Wire Shielded MicroCable, M-12