2
(**Advanced Option)
Press either the
_ or
+ button to start a Dynamic Set; pull labels and gaps through sensor;
press either the
_ or
+ button to complete.
Sensor exits to run mode and should be setup and ready for operation.
Change from off to on by momentarily pressing either the
_ or
+ button. The Auto adjust
evaluates signal levels and makes automatic adjustments to keep the sensor in optimum
response levels.
Change from GAP ( ) to LABEL ( ) by momentarily pressing either the
_ or
+ button.
Output will toggle back and forth in this mode.
= Output on the Label
= Output in the Gap
Momentarily press either the
_ or
+ button to toggle orientation.
Press Menu for Detailed Setup
This option allows the operator to visually inspect the current setup for repeatability. The
sensor scope will also reveal any nominal setup issues or sensitivities to label or gap
thickness changes.
Momentarily press the
_ button to shorten the time between signals. Momentarily press the
+
button to lengthen the time between signals.
(**Advanced Option)
Off Delay: Outputs stay
on for set time after
duration of input.
On Delay: Outputs turn
on when input exceeds
set time
One Shot: Outputs turn
on for set time when
triggered by input
Debounce: Outputs are
stabilized and held in
current state for
duration of time setting
PRESS
the
+ button
PRESS
the
_ button
Run Mode
Hold - : Gap Set
Hold + : Label Set
Tap +/- : Threshold
Factory Menu
Hold Menu on Power Up
for more Options
Support
Tri-Tronics Tampa, FL
www.ttco.com/cls
[email protected]
Dynamic Set
Tap Menu Button
Tap +/- to Start
Advance 3+ Labels
Tap +/- to End
Remote Imput
Tap 1x : Gap Set
Tap 2x : Label Set*
Hold : Dynamic Set
Label Set
Can be used after a
Gap/Dyn Set to set
max label thickness
Support
Tri-Tronics Tampa, FL
www.ttco.com/cls
[email protected]
PRESS
the
+ button
PRESS
the
_ button
Press the the
_ button to scroll down through simple setup and options instructions.
Press the the
+ button to scroll up.
Momentarily press either the
_ or
+ button to toggle from Lock ( ) to Unlock (no symbol).
Useful for tamper-free operation.
