manualshive.com logo in svg

Tri-Tronics Field G3 series, Owner'S Manual, Page: 2 / 26

Share
Download
Tri-Tronics Field G3 series Owner'S Manual Download Page 2

G2 Field & Pro, G2 EXP Field & Pro, 

and Sport G3 Series Remote Trainers

Congratulations on your purchase!

All Tri-Tronics Remote Trainers are proudly made in the USA.

Tri-Tronics takes great pride in the design, manufacture, service and safety 

of all our products. We always want to hear from you, our customer. 

If you have Internet access, you can visit our website 24 hours a day at

www.tritronics.com for the latest information available regarding your product 

and our support services, for training information, or to purchase accessories 

for your Tri-Tronics Remote Trainer. 

We can also be reached at [email protected]

or by calling toll free 1-800-456-4343.

Thank you for choosing Tri-Tronics.

Models Covered 

Classic 70 G2, Classic 70 G2 EXP, Field 90 G2, Field 90 G2 EXP, 

Flyway G2, Flyway G2 EXP, Upland G2, Upland G2 EXP, 

Trashbreaker G2, Trashbreaker G2 EXP, 

Pro 100 G2, Pro 100 G2 EXP, 
Pro 200 G2, Pro 200 G2 EXP, 
Pro 500 G2, Pro 500 G2 EXP, 

Sport Basic G3, Sport Combo G3, Sport Upland G3

(The above product names are registered trademarks of Tri-Tronics, Inc.)

Summary of Contents for Field G3 series



























Reviews:

No comments