background image

3041 Sunrise Blvd.

Rancho Cordova, CA 95742  

+1(916) 288-6100 • +1(800) 345-5015  

www.tritool.com

EYE HAZARD

 - Always wear appropriate eye protection while operating 

the equipment.

PINCH HAZARD

 - Keep your hands and clothing away from moving 

parts.

CRUSH HAZARD

 - The machinery, pipe, or work piece can shift, 

separate, lurch, or fall.

CHIP HAZARD

 - Metal chips may be hot and sharp. Be careful when 

you clear the tooling path or clean up chips.

TIE DOWN HAZARD

 - Deliberate overriding of safety triggers can 

result in serious injury. Never lock or tie down any safety triggers.

SHOCK HAZARD

 - Ensure that the equipment is properly installed 

and grounded. Ensure that the equipment is not damaged and that the 

power cord is intact.

 

• Tool bits are sharp and can cause serious injury.

• Do not defeat or modify safety features.

• Disconnect power sources before servicing or moving the equipment.

• Remove all loose articles of clothing and jewelry before operating the equipment.

Be Safety Conscious!

©Copyright Tri Tool Inc.  PN 81-0542 (04-21)

Read the manual and be familiar with all safety precautions before operating equipment. 

The following are general warnings for industrial equipment with moving parts. Refer to 

WARNING

OTHER HAZARDS

Summary of Contents for 550 Series

















































Reviews: