TRI TOOL INC.
92-0749 Rev. 210701
10
Feed
The manual feed handle is mounted at rear of tool. It providing .560” (14.2mm) of axial
feed.
Mounting
Manual saddle clamping system
Speeds
Speed Control
Electric Drive: Dual range, variable speed.
Pneumatic Drive: On/Off trigger and twist type air flow control valve.
Electric Drive Motor Free Speed
900 RPM (Low)
2800 RPM (High)
Cutting Head Speeds:
75 RPM Max.
Functional Speed Range:
0 to 70 RPM
Cutting Capacities
Basic Pipe Sizes
1/8" through 3/8" pipe - All schedules
1/2" through 1 1/4" pipe- Schedule 5 through schedule 160
1 1/2" through 2" pipe - Schedule 5 through schedule 80
1 1/2" through 4" pipe - Schedule 5 through schedule 40
Basic Tube Sizes
- .250" (6.35 mm) to 4.50" (114.30 mm) OD
Wall Thickness Capacity
- Basic Tubing with a maximum wall thickness of .250" (6.35 mm)
Material Cutting Capabilities
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and aluminum without
limitations other than size and wall thickness as specified.
Inconel and some other high-temperature alloys may require special procedures as a
function of wall thickness and type of end preparation. Contact the Engineering Department
at TRI TOOL INC. for details.
