Trevi UHD-5002 SMART, Instruction Manual

Page: 39 / 44

39
UHD 5002 SMART ENGLISH
SPECIFICATIONS
RGB INPUT
Mode Resolution
Horizontal
Frequency
(KHz) Vertical
Frequency
(HZ)
DOS 720x400 31.5 70
VGA 640x480 31.5 60
SVGA 800x600 37.9 60
XGA 1024x768 48.4 60
WXGA 1920x1080 67.5 60
HDMI INPUT
Mode Resolution
Horizontal Frequency
(KHz) Vertical Frequency
(HZ)
VGA 640 x 480 31.47 59.94
480i 720 x480i 15.73 59.94/60
576i 720 x 576i 15.63 50
480p 720 x480p 31.47 59.94/60
576p 720 x 576p 31.26 50
720p 1280 x 720p 37.50
44.96 50
59.94/60
1080i 1920 x 1080i 28.13
33.75 50
59.94/60
1080p 1920 x 1080p 56.25
67.5 50
59.94/60
UHD 3840 × 2160
COMPONENT VIDEO (YPbPr) INPUT
Mode Resolution
Horizontal Frequency
(KHz) Vertical Frequency
(HZ)
480i 720 x480i 15.73 59.94/60
576i 720 x 576i 15.63 50
480p 720 x480p 31.47 59.94/60
576p 720 x 576p 31.26 50
720p 1280 x 720p 37.50
44.96 50
59.94/60
1080i 1920 x 1080i 28.13
33.75 50
59.94/60
1080p 1920 x 1080p 56.25
67.5 50
59.94/60
Due to continuous product development, specifications are subject to change without prior notice.
Troubleshooting
Before consulting service personnel, check the following chart for possible solutions.
PROBLEM SOLUTION
TV will not turn on
● Make sure the power cord is plugged in.
● The batteries in the remote control may be
drained; replace the batteries.
No picture, no sound
● Check the cable between TV and antenna/ external
AV device.
● Press the power button on the remote.
● Press the SOURCE button the remote, then press the
“ ▲ / ▼ ”button repeatedly to select the TV source.
Poor picture, sound OK
● Check the cable between TV and antenna/ external
AV device.
● Try another channel, the station may have broadcast
difficulties.
● Adjust the brightness/contrast in the Video menu.
Check that the unit is set to PAL
Audio noise ● Move any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated
technology to produce. However, there may be a small number of bright or dark pixels on the
screen. These pixels will have no impact on the performance of the product.