19
SAT 3387FA
ENGLISH
Figure 3-2
Satellite List
The Satellite List (see figure above) shows all the satellites the system has stored. Users can press color
function keys on the remote controller to edit the list, for example to add a satellite (by pressing the red
function key), to delete a satellite (by pressing the yellow function key), to scan the selected satellite (by
pressing the blue function key), etc.
Also you can press the green function key to edit the detailed information of the selected satellite: Satellite
Name, Position and Longitude. See the figure below:
Figure 3-3
Edit Satellite
3.1.3 Transponder List
In the Installation menu, press UP/DOWN keys to highlight the Transponder List item and then press ENTER
or RIGHT keys to enter the Transponder List page. See the figure below:
Figure 3-4
Transponder List
The Transponder List stores the transponders of current satellite of current system. Each transponder may
have multiple frequencies. You can press color function keys on the remote controller to edit the list, for
example to add a transponder (by pressing the red function key), to edit a transponder (by pressing the
green function key), to delete a transponder (by pressing the yellow function key), to scan transponders (by
pressing the blue function key), etc.
