29
• Use a soft, dry cloth to clean the mobile phone, battery and charger.
• Please do not use alcohol, thinner, benzene or other solvents to wipe the mobile phone.
• A dirty outlet will cause poor electrical contact, lose of power and even inability to
recharge. Please clean regularly.
2. Inserting the SIM card and battery
Make sure your phone is turned off before performing the following procedures:
1.
Carefully remove the back cover by unscrewing the two screws Fixing (14) as shown below.
2.
Insert the SIM in SLOT-1 with the metal contacts facing down and taking care to respect
the position of the angle cut the SIM.
3.
Insert the battery paying attention to the metallic contacts.
4.
Replace the back cover carefully, taking care not to damage the plastic anchors and
tighten the screws (14) securing the unit cover
5.
Before using the device for the first time, you must fully charge the battery, to do so
ENGLISH
