30
1) The mobile phone cannot automatically identify the Micro SD card being inserted when
the mobile phone is powered on. You must power off the mobile phone and then power
it on, so that the phone can identify the Micro SD card.
2) The Micro SD card is a miniature object. Keep it out of the reach of children for fear that
children swallow it!
3) Some card brands may not be compatible with the phone. The use an incompatible
memory may be damaged or the card memory itself.
4) The appliance only supports memory formatted in FAT. If you enter formatted cards
differently the phone will ask you to reformat the memory card.
Charging battery
CHARGING THROUGH POWER SUPPLY:
1.
A device turned off, connect the Micro USB plug of the supplied cable to the Micro
USB phone (
to
use the supplied cable only
).
2.
Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet.
3.
The device will turn on for a few seconds to show the battery icon with it is charging.
4.
When the battery is fully charged (the icon is no longer moving), disconnect the power
supply from the wall outlet and then disconnect the plug from the Micro USB phone.
CHARGING THROUGH “CHARGING BASE” (CRADLE):
1.
Connect the Micro USB plug of the supplied cable to the Micro USB base (24). Always
use the provided cable, other cable with Micro USB socket could not work with this unit.
2.
Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet, the front Led base will be green.
3.
Enter the phone turned off inside the base with the keypad facing frontally, the device
will switch on for a few seconds to show the battery icon with charging and the front
LED of the base will turn red.
4.
When the battery is fully charged (the icon is no longer moving) the Front led the base
will become green again. At this point you can remove the phone from the base and use
it normally.
You can also charge your phone by plugging it into a USB port of a computer using, simply,
the supplied USB cable.
Notes:
•
Use only the Micro USB cable supplied.
• Use only the mains adapter supplied, different power supplies may damage the battery.
• You can use the device even when it is charging, but, for longer life battery, not
recommended for use; Furthermore, using the apparatus, the timing of Charging may
take longer.
ENGLISH
Summary of Contents for FLEX PRO 100 3G
Page 2: ......
