13
CMP 532 USB
6
CORRECT
FROM THE CENTRE TO THE EDGE
INCORRECT
USB OPERATION
1. Set the FUNCTION button to “CD/MP3/USB/AUX IN” position, press and hold the STOP/USB
button for about 2 seconds to enter the USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks stored in the
USB. The unit will start playback from track 1 after reading finished.
3. Press PLAY/PAUSE/STANDBY button to pause and resume playback.
4. Press the STOP/USB button to stop playing. The display will show total number of USB and STOP.
5. Proceed repeat play (repeat 1- repeat folder - repeat all)/program play/skip next and back operation as
described in above “CD/MP3 OPERATION”.
CAUTION:
Do not use any USB extension cable for connecting the USB device to avoid any conflict.
AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can be connected to
this unit and be amplified.
1. Set the FUNCTION switch to CD/MP3/USB/AUX IN position.
2. Connect the audio cable into the AUX-IN jack and the other end connect to the AUDIO OUT jack of
the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
Press PLAY of the external audio source
(
eg.MP3 player
)
to start playback.
COMPACT DISC MAINTENANCE
1. Always use a compact disc bearing the mark as shown.
2. Notes on handling discs
Removing the disc from its storage case and loading it.
Do not touch the reflective recorded surface.
Do not stick paper or write anything on the surface.
Do not bend the disc.
3. Storage
Store the disc in its case.
DO not expose discs to direct sunlight or high temperatures, high humidity or dusty places.
4. Cleaning a disc
Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.
The disc should be cleaned from the center to the edge.
Never use benzene, thinners, record cleaner fluid or anti-static spray.
Be sure to close the CD door, so the lens is not contaminated by dust.
Do not touch the lens.
7
SPECIFICATIONS
GENERAL
Power Source: ……………………………………AC 230V ~ 50Hz
DC 9V 1.5V UM-2/C x 6pcs
Power consumption ………………………….… 14 Watts
Standby consumption ………………………….
<
0.5 Watts
Weight……………………………………………..Approx. 1.2 kg
Dimensions……………………………………….. Approx.214mm (L) x 204mm (W) x 110mm (H)
Operation temperature…………………………….+ 5°C - + 35° C
RECEIVER SECTION
Receiving Bands………………………………….AM/FM ST.
T
uning Range: ………………………………….. AM: 540 - 1600 KHz
FM: 87.5 - 108 MHz
COMPACT DISC SECTION
Optical Pickup……………………………….……3-Beam Laser
Frequency Response ………………………… …..100Hz - 16KH z
AUDIO SECTION
Power output ……………………………………... 0.8 Watts x 2 (RMS)
Aux In Jack………………………………………3.5mm
ACCESSORIES
Instruction Booklet ………………………………1
AC Cord ……………………………………………1
Specifications are subject to change for continuous improvement, we reserve the rights to
modification without prior notice.
ENGLISH
Summary of Contents for CMP532USB
