TDS-225/750 T
6287
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80 www.ega.com.pl
4
work to be performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
WARNING! The device is used for indoor work. Despite the use of a safe structure from
the very foundation, the use of protective measures and additional protective
measures, there is always the risk of residual injury during work.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
2.
SAFETY INSTRUCTION FOR ALL OPERATION
a)This power tool is intended to function as a sander. Read all safety
warnings, instructions, illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
b) Operations such as grinding, wire brushing, polishing or cutting-off
are not recommended to be performed with this power tool. Operations
for which the power tool was not designed may create a hazard and cause
personal injury.
NOTE List only those operations that were not included in the first
warning. If all listed operations are recommended, then this warning may
be omitted but all subsequent warnings must be given without an
exclusion.
c) Do not use accessories which are not specifically designed and
recommended by the tool manufacturer. Just because the accessory can
be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running faster
than their rated speed can break and fly apart.
