TDS-225/750 T
6287
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80 www.ega.com.pl
16
If necessary to raise height of sanding disc, you can put an extra ring on
output shaft.
Maintenance
Keep tools clean, clean up debris and dust.
Often add in lubricating oil and grease (reducer, bearing) to keep the tool
flexible operation.
Always check the power cable, plug, switch, so that the tools in good
condition. Any other inspection shall be made by a qualified technician.
Carbon Brush replacement
The accessories includes an original set of carbon brush, when the carbon
brush wear limit, replace with the new one. "+" screwdriver counter clock
wise unscrew the brush cover, remove the original carbon brush, to put
new carbon brush to brush holder and screw on the brush cover.
