TID-13/1050
4659
“EGA" Spółka z o.o. Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax:+48 58 56 300 80 www.egatools.com
22
Variable speed control
The rotational speed of the drill can be adjusted using the speed control knob
placed on
the switch. To increase the speed, turn the knob to the right (Fig.5).
To reduce the
speed, turn the knob in the opposite direction.
(Fig.5)
Additional handle
Additional handle provides additional control, support and conduct drills.
Auxiliary handle can be rotated by 360°, allowing you to set it in the most comfortable
position. Installation of the additional handle:
1.Loosen retaining ring slightly loosening the grip of the handle (Fig.6).
2.
Pass the auxiliary handle by chuck and put it on a drill (Fig.7).
3.Properly tighten the mounting nut (Fig.8).
Fig.6 Fig.7 Fig.8
Depth stop
1.With the use of the depth, you can set the desired drilling depth and / or perform many of
the same drilling. Depth gauge helps ensure precision drilling, if it is necessary to drill holes
to a predetermined depth.
2.Setting the drilling depth: According loosen the auxiliary handle, insert the depth setting
the required depth (Fig.9), and then properly tighten the chuck further.
3.Checking drilling depth: For highest precision, depth must be set using a steel ruler. Then
turn the handle grip in order to establish the handle and stop in the desired position
(Fig.10).
