ASSEMBLY
STEP 4
ASSEMBLY
STEP 5
HARDWARE BAG 4 CONTENTS:
HARDWARE BAG 5 CONTENTS:
Attach FRONT HANDLE (54) to LEG DEVELOPER (7) using one CHAIN HOOK (53), CABLE (56) and
one PIN A (51).
Attach two BACK SUPPORT FRAMES (9) to CENTER BASE FRAME (4) and ADJUSTABLE INCLINE BAR
(13) using one 3/8"x7" HEX BOLT (37), two 3/8" WASHER (47) and one 3/8" LOCKNUT (46).
Insert "L" PIN (30) through the holes of BACK SUPPORT FRAME (9).
Attach BACK REST CUSHION (19) to BACK SUPPORT FRAME (9) using four M8X38 HEX BOLT (41) and
four M8 WASHER (49).
Attach SEAT CUSHION (18) to CENTER BASE FRAME (4) using four M8X35 HEX BOLT (42) and four M8
WASHER (49).
Insert ARM CURL SUPPORT FRAME (11) into FRONT UPRIGHT FRMAE (6) at desired height. Fix with PT-1
POP PIN (33).
Attach ARM CURL PAD (17) to ARM CURL SUPPORT FRMAE (11) using two M8X16 HEX BOLT (43) and
two M8 WASHER (49).
Insert FOAM RODS (16A & 16B) through the holes of LEG DEVELOPER (7) and FRONT UPRIGHT FRAME (6)
as shown, slide one FOAM ROLL(29) for each end of FOAM RODS (16A & 16B).
14
15
(46) 3/8”
LOCKNUT 13PCS
(47) 3/8”WASHER
26PCS
(37) 3/8”X7” HEX BOLT 1PC
(49) M8 WASHER
14PCS
(49) M8 WASHER
14PCS
(43) M8X16
HEX BOLT 2PCS
(42) M8X35
HEX BOLT 4PCS
(49) M8 WASHER
14PCS
(41) M8X38
HEX BOLT 4PCS
