INSTALLATION
WIRING CONFIGURATION
We recommend professional installation by an authorized TREO Engineering
dealer.
An in-line fuse should be installed no more than twelve inches away from the
battery. An in-line fuse will help protect against short circuit and fire in your
vehicle.
This amplifier should be installed using power and ground cables that are at
least 4 AWG wire. This amplifier should NOT be installed using 8 AWG power
wire. Please ensure the ground wire is at least as thick as the power wire and
that the length of the ground wire is kept as short as possible. The ground wire
should be connected to unpainted metal on a solid part of the vehicle chassis.
The amplifier must be mounted securely to a solid location in the trunk or
passenger area that will remain dry and subject to as little vibration as possible.
Do not install the amplifier in the engine compartment.
Use high quality twisted-pair RCA cables whenever possible. Keep low-level
signal cabling as far as possible from power wiring.
