CaterSense
the Intelligent answer
CS-INST2-0.002
Model: CaterSense 02
Page 10
07-11
2.03 Functional Operation
The operation of the CaterSense unit and system in this Mode is as follows:
In the event of a system fault (i.e. gas pressure fault, fan failure, knock-off button depressed,
fire alarm detected) the system must be reset by pressing
SYSTEM STOP
, or for systems
with remote start/stop, opening and closing the enable contact.
On systems with remote start/stop, if the local
SYSTEM STOP
pad is pressed, the system
stops immediately. This can be reset by either pressing
SYSTEM STOP
again, or by opening
and then closing the enable contact.
PRESS
GAS VALVE
GAS VALVE OPENS
GAS PRESSURE
All other LEDs
GAS VALVE
GAS VALVE CLOSES
SYSTEM CONDITION
GAS VALVE
GAS PRESSURE
All LEDs
GAS VALVE OPENS
START
RESET / GPT
10 sec
30 sec
1 min
OR CLOSE "ENABLE"
CONTACT
PRESS
GAS VALVE
GAS VALVE CLOSES
All other LEDs
SYSTEM
STOP
GAS SHUT OFF
OR OPEN "ENABLE"
CONTACT
