7) Click on
Connect
, wait a few seconds and see if it gets an IP address from your ISP.
Q: How do I configure the TW100-BRF114U for a Cable connection using a Dynamic IP
Address?
A:
Note: The default setting of the router is configured for a Cable connection using a Dynamic
IP Address.
1)
Open your web browser and type the IP address of the TW100-BRF114U in the address
bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and
password (blank).
NOTE: If the Setup Wizard starts, click on
Cancel.
2)
Click on
Advanced
then
WAN Por
t on the left hand side
3)
If your ISP has registered the MAC address of your computer that you are managing the
router from click on
Copy From PC
under the
WAN PORT MAC Address
field. This
will copy your computers MAC address to the router. If you are not managing the
computer from the computer with the registered MAC address make sure you enter the
registered MAC address manually.
4)
Choose
None (Direct Connection)
in the
Login Method
field in the
Login
section.
5)
Click
Save
.
04/03/2006