background image

Internet Features 

45 

DDNS Data 

User Name 

Enter the "User name" specified at the www.dyndns.org Web site 
when you registered. 

Password 

Enter your current password for www.dyndns.org 

Domain Name 

 

Enter your domain name, as allocated at www.dyndns.org. 

 

The name should consist only of letters and the hyphen (dash). 
Using any other characters may cause problems.. 

DDNS Status 

This message is returned by the DDNS Server at www.dyndns.org 

 

Normally, this message should be "Update successful" (current 
IP address was updated on the www.dyndns.org server).  

 

If the message is "No host", this indicates the host name entered 
was not allocated to you. You need to connect to 
www.dyndns.org and correct this problem.  

 

 

TW100-BRF114 User’s Guide 

46 

MAC Address 

The MAC (hardware) address is a low-level network identifier. It may be called "MAC Ad-
dress", "Hardware Address", or "Physical Address". On a PC, this address is associated with 
the Network card or adapter. The address on the 

MAC Address

 screen is the address on the 

Internet (WAN port) interface, and has no effect on the LAN interface. 

 

If your ISP asks for the "Network Adapter Address", "Physical Address", "Hardware 
Address", or "MAC Address" for the PC the DSL/Cable modem is connected to, provide 
this value. 

 

If your ISP has already recorded a MAC address, you can change the address used by the 
Firewall Router to match the address recorded by your ISP. 

MAC Address Screen 

Select 

MAC Address

 from the 

Advanced

 menu to reach a screen like the example below. 

 

Figure 31: MAC address Screen 

Data - MAC address Screen 

MAC (hardware) 
Address 

The current MAC (hardware) address is displayed. 

If your ISP has recorded a Hardware Address, you can "spoof" that 
address by entering it in the address field. The hardware address 
consists of 12 characters, where each character is a digit (0..9) or a 
character between A and F.  

Buttons 

Default 

Inserts the default MAC address into the MAC address field. You 
must click "Save" to actually change the address used.  

Copy from PC 

Inserts the MAC address from your PC into the MAC address field. 
You must click "Save" to actually change the address used.  

Save 

Save your changes to the Firewall Router. 

Cancel 

Reverse any changes made since the last "Save". 

 

 

If the MAC address is changed, the Firewall 
Router must restart. 

 

Summary of Contents for TW100-BRF114









































Reviews: