TRENDnet TW-H6W1IR, User Manual

Page: 141 / 165

TW-H6W1IR ISDN Remote Router
Using Telnet 133
Using Telnet
The TW-H6W1IR router can be configured and managed using telnet.
Telnet accesses the same built-in configuration program as the RS-232
Diagnostic port console connection. As such, all settings that can be
adjusted through the console can also be configured using Telnet.
Telnet Configuration
In order to use telnet, the TW-H6W1IR router must first be configured
using a console connected to the RS-232 Diagnostic port. Depending
on the placement of the management station using telnet, the initial
configuration requirements for the router are as follows:
Using Telnet via LAN
Preparing the router for management by telnet over the LAN only
requires enabling the LAN port, enabling telnet, and assigning the LAN
port an IP address. To do this:
1. Connect a console to the RS-232 Diagnostic port on the front
panel of the router and run a terminal emulation program (for more
information, see
Connecting the Console to the Router and
Setting Up the Console sections of this manual).
2. Enable the LAN port in the
Interface Configuration
sub-menu.