TRENDnet TV-IP672P, User Manual

Page: 5 / 39

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672P / TV-IP672PI
3
Installation
Wired Connection
1. Connect the Ethernet Cable
If you intend to use the network camera as a wired device, connect one end of
the included Ethernet cable into the
Ethernet port on the rear panel of the
camera and connect the other end to an available port on your network. If you
prefer to use the camera on a wireless network, see below for instructions on
connecting the power adapter.
2. Attach the Power Supply
Attach the included power supply to the DC 12V 1.25A receptor on the rear
panel of the camera and then connect it to a wall outlet or power strip. A blue
LED will light up under the lens indicating that the camera has power.
Wall mount installation
To attach the metal plates carry out the following:

Remove the two rubber pads under the base of the Camera.

Slide the metal plate onto the base of the camera, making sure that the two
holes on the base of the camera align with the two screw holes on the base of
the camera.

Secure the metal plate to the base of the Camera with the two screws
provided.

The camera can now be mounted to the ceiling or a wall. See the diagram
below for more information.