© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP572P / TV-IP572PI
5
Installation
Wired Connection
1.
Connect the Ethernet Cable
If you intend to use the network camera as a wired device, connect one end of
the included Ethernet cable into the
Ethernet
port on the rear panel of the
camera and connect the other end to an available port on your network. If you
prefer to use the camera on a wireless network, see below for instructions on
connecting the power adapter.
2.
Attach the Power Supply
Attach the included power supply to the
DC 5V 1.2A
receptor on the rear panel
of the camera and then connect it to a wall outlet or power strip. A blue LED
will light up under the lens indicating that the camera has power.
Starting the Setup Wizard
Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run
automatically.
Note:
If the Install Wizard does not run, you may have autorun disabled on your
machine. In this case, browse to the CD drive and run
InstallWizard.exe
to begin the
installation wizard.
Begin by selecting
Setup Wizard
and follow the on-screen steps to continue the
installation.
When the installation of the Setup Wizard is complete, run the Setup Wizard:
1.
Click
Start > Programs > TRENDnet > SetupWizard > SetupWizard.
The
TRENDnet Setup Wizard appears.
Summary of Contents for TV-IP572P
Page 1: ...TRENDnet User s Guide Cover Page...
Page 39: ......
