TRENDnet TV-IP300, User Manual, Page: 33 / 52

64
\
System
Configuration This button is used to configure the system settings.
]
Play Click to bring up IPView SP Player to play the
recorded video clip.
^
Help Click to bring up the help window.
Components on Display screen
NO. Component Description
X
View Window
(1~4) Display the video image from the active camera,
including the current date and time.
Y
Snapshot
Click the Snapshot button
to capture a still image
of the active camera.
Z
View Mode
Buttons
Select the view mode from the three buttons: Scan
Mode , One Camera Mode , and Four Camera
Mode .
- Scan Mode : Click to enable displaying the
video images in circles. Please note that this
mode needs two cameras on-line at least.
- One Camera Mode : Show one camera’s
video image in the whole display area.
- Four Camera Mode : Show four cameras’
video images in the display area.
[
Select Buttons
Click the two buttons to select the active
camera.
\
Window
Control Buttons Control the Display screen from the three buttons:
Always on top , Minimum , and Maximum .
- Always on top : Keep the Display screen on
top of the desktop.
- Minimum : Minimize the Display screen.
- Maximum : Maximize the Display screen.
65
Using IPView SP
Adding a Camera
To add a new camera:
1. Click the Camera button (1~4) to bring up the following
dialog box.
Alternately, you can directly click
Assign
button if you do not
change the camera number.
2. Enter the IP address of the camera (default: 192.168.0.30 .) in
the IP Address box and select the Protocol type ( UTP , TCP ,
and HTTP ) from the pull-down menu. Then, click
Add
to
add a new camera.
If you are not sure of the camera’s IP address, you can click
Browse to search the available camera(s) within the network;
then, select the one you want (if more than one camera found)
by highlighting it and click
Add
.
Enter the IP address
of the camera.
Select the protocol type
Click