TRENDnet TV-IP300, User Manual, Page: 32 / 52

62
Display screen
The following tables provide the description of components on
the IPView SP screen and Display screen:
Components on IPView SP screen
NO. Component Description
X
Camera
Information
Area Display the general information of the connected
camera, including the camera number, IP address,
connect port, and on/off line status.
Y
Camera (1~4) Control 1~4 camera(s).
X
Y
Z [ \
63
Z
Connecting
Control Area This area provides four buttons to control the connect
status of camera. The four buttons include:
Assign ,
Connect/Disconnect , Erase , and Camera Setting .
- Assign: Click to enter the IP Address (default
setting: 192.168.0.30 ) of the camera in the pop-up
dialog box. Then, click
Add
to add a new camera.
If you are not sure of the camera’s IP Address,
you can click
Browse
to find the available camera;
then, select the one you want (if more than one
camera found) by highlighting it and click
Add
.
In addition, you can select the protocol type from
the pull-down menu:
UTP , TCP , and HTTP .
- Connect/Disconnect: The connected camera can
be disabled temporarily by clicking
Disconnect
button. To resume the camera, click
Connect
.
- Erase: Click to remove the connected camera
from the list.
- Camera Setting: Click to launch the Web
Configuration Utility to change the settings.
[
Recording
Control Area This area provides recording function for the camera.
You can select the recording mode from the pull-
down menu:
Manual Record , Schedule Record , and
Motion Record .
By default, the recorded video will be saved in a sub-
folder that is created automatically by the software
and named as [camera number]_[camera IP address]
under the
IPView SP folder. You can change the
settings in System Configuration.