TRENDnet TV-IP201, User Manual, Page: 21 / 105

20
5
U
SING THE
C
AMERA
You can access and manage the Internet Camera through: 1) a
web browser, and 2) the enclosed software IPView Pro. This
chapter describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The Internet Camera must be configured through its built-in Web-
based Configuration. (
Extensive knowledge of LAN will be helpful
in setting up the Internet Camera. )
From the web browser, enter the default IP address
192.168.0.30
in the Address bar and then press [
Enter
] to access the Welcome
screen of the Configuration Utility. The Welcome screen is
shown on the next page.
NOTE: The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to communicate.