8
WEB BASED AP CONFIGURATION
First make sure that the network connections are functioning normally.
This 85Mbps Powerline Wireless Access Point can be configured using Internet Explorer 5.5 or
newer web browser versions.
Login to the 85Mbps Powerline Wireless Access Point
Before configuring the 85Mbps Powerline Wireless Access Point through WLAN, make sure
that the SSID, Channel and the WEP is set properly.
The following are the default settings of the 85Mbps Powerline Wireless Access Point:
SSID:
Powerline
Channel:
6
Security:
disable
IP Address:
192.168.1.200
HomePlug Group:
HomePlug
Using the Web Browser
1.
Open Internet Explorer 5.5 or above web browser.
2.
Enter IP address
http://192.168.1.200
(the factory-default IP address setting) to the URL
web address bar.
Figure 6. Web address
3.
When the following dialog box appears, enter the user name and password to login to the
main configuration window, the default username and password is “
admin
”.
Figure 7. Login
Note: If user needs to set a password, then refer to the
System – Password Setting
.
After entering the password the main page is shown, and the screen will display the device
information.
