TRENDnet TPE-P521ES, User Manual, Page: 39 / 68

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-P521ES
36
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Network, click on VLAN, and click on Private.
3. To configure Private VLAN Settings, perform the following procedure:

Set the Source Port to one of the following choices from the pull-down menu:
All, 01 – 05

Click on the Forwarding Ports ratio button that applies to your configuration.

Click Add to add the new entry, or Delete to delete the entry for the selected
Source Port.
NOTE: The configured settings are only applied to the switch’s temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch’s NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.