1-5
Working with Windows 3.1 & Workgroups
Before installation, make sure the PCMCIA Card Service and
Socket Service drivers has been installed in your computer already,
most of the notebook computers have those drivers by default. If
not, ask your computer dealer to have one.
1.
Turn on your computer.
2.
Insert the Fax/Modem PC Card into the free PCMCIA slot,
and make sure it is firmly seated.
3.
You will hear the alert sound to inform you that the PC Card
is recognized and configured.
4.
Skip this step and step 5 if you don’t meet any problems.
Otherwise, run the PCMCIA utilities come with your
computer, such as CardView (click
View ...
button), or run
PhoenixCARD Manager to collect the COM port and IRQ
information. Refer to following figures.
5.
Enter the
Ports
properties in
Control Panel
to configure
COM port and IRQ.
6.
Install FAX/MODEM application program come with the
fax/modem card.
7.
Connect the FAX/MODEM interface cable and hook up the
RJ-11 plug to the telephone line outlet. Now your fax/modem
is ready to go.
