1-24
DCE speed
\V1 *
Enable protocol result code appended to
DCE speed
*
Manufacturer default
Extended “AT%” (Percent) Command Set
Command
Options
Function & Description
%B
View numbers in blacklist. If blacklisting is
in effect, this command displays the
numbers for which the last call attempted
in the past two hours failed. The ERROR
result code appears in the countries that do
not require blacklisting.
%Cn
Data compression control
%C0
No data compression
%C1 *
V.42bis/MNP 5 data compression enabled.
*
Manufacturer default
Extended “AT-” (Dash) Command Set
Command
Options
Function & Description
-Cn
Data calling tone options
-C0 *
Disable data calling tone
-C1
Enable data calling tone (the freq. is 1,300
Hz with a cadance of 0.5 sec. ON and 2
sec. OFF)
*
Manufacturer default
7.2 Result Code Options
Result Code Options Table
ATV0
ATV1
X0
X1 X2 X3 X4 X7
