1
1. Before You Start
Package Contents
Ÿ
Proprietary/Passive PoE injector (24V DC, 0.6A)
Ÿ
Mounting Hardware
Minimum Requirements
Ÿ
Computer with a network port and web browser
Ÿ
A network switch or router with an available network LAN port
Ÿ
Additional TEW-840APBO H/W: v1.xR wireless AC867 directional access point
Ÿ
4 x RJ-45 network cables
Ÿ
TEW-840APBO
Ÿ
Quick Installation Guide
Note:
The TEW-840APBO does not support IEEE 802.3at/af PoE standards. You must use the
proprietary/passive power over Ethernet injector that is supplied with the TEW-840APBO. This
installation guide will walk you through the installation and configuration of two TEW-840APBO
access points to establish a wireless point to point bridge using WDS (wireless distribution
system). The RJ-45 Ethernet cable between the passive PoE injector and access point can have
a maximum length of up to 60 m (197 ft.).