TRENDnet TEW-827DRU User Manual Download Page 64

Page: 64 / 83

TRENDnet User’s Guide

TEW-827DRU

Manual Firmware Upgrade

1. If a firmware upgrade is available, check the router model on our website

http://www.trendnet.com/support

and download the firmware to your computer.

2. Unzip the file to a folder on your computer.

Please note the following:



Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.



If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.



Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.



Do not upgrade the firmware using a wireless connection, only using a wired
network connection.



Any interruptions during the firmware upgrade process may permanently
damage your router.

1. Log into your router management page (see “

Access your router management page

”

on page 10).

2. Click on Advanced and click Setup, then click Firmware.

3. Depending on your web browser, in the Upload Firmware section, click Browse or
Choose File.

4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is

located and select it.

5. Click Apply. If prompted, click Yes or OK.

Summary of Contents for TEW-827DRU



















































































Search results

Summary of Contents for TEW-827DRU

Reviews:

Brands by name

Popular brands

TRENDnet TEW-827DRU, User Manual

Search results

Summary of Contents for TEW-827DRU

Reviews:

Brands by name

Popular brands