TRENDnet TEW-800MB, User Manual

Page: 16 / 91

15
The TEW-812DRU 802.11ac(draft 2.0)3x3 Gigabit Wireless Router lets you access your network, using
a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that
the number, thickness and location of walls, ceilings, or other objects that the wireless signals must
pass through, may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
1 Keep the number of walls and ceilings between the TEW-812DRU and other network devices to
a minimum - each wall or ceiling can reduce your wireless product’s range from 3-90 feet
(1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over
42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or
ceiling (instead of at an angle) for better reception.
3 Building Materials can impede the wireless signal - a solid metal door or aluminum studs may
have a negative effect on range. Try to position wireless devices and computers with wireless
adapters so that the signal passes through drywall or open doorways and not other materials.
4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances
that generate extreme RF noise.
Getting Started
For a typical wireless setup at home, please do the following:
1.
You will need broadband Internet access (a Cable or DSL-subscriber line into your home or
office)
2.
Consult with your Cable or DSL provider for proper installation of the modem.
3.
Connect the Cable or DSL modem to the TEW-812DRU Router (WAN port).
4.
Ethernet LAN ports of the TEW-812DRU are Auto MDI/MDIX and will work with both
Straight-Through and Cross-Over cable.
Start