© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750DAP
5
Hardware Installation
1. Position your AP close to your computer. Place the AP in an open area
of your intended work area for better wireless coverage.
2. Plug one end of the included blue Ethernet cable that came with your AP
into one of the four Ethernet ports on the back of the AP. Plug the other
end of this cable into the Ethernet port of your PC.
3. Connect the supplied power adapter into the power port on the back of
the AP and then plug it into a power outlet or surge protector. Press the
power button and verify that the power LED is lit. Allow 1 minute for the
AP to boot up.
Configuration
Log in the Web-based Management
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or
Opera) and go to
http://192.168.10.100
. Your AP will prompt you for a user
name and password.
2. When entering the user interface at the first time, the AP requests the user to
change the password. It is highly recommended to change to a new
password. Enter the new password in the Password and Verify Password
field, and click Next. If the user does not change the password, the default
password is admin.
3. The window displays the wireless settings of the AP. The user can print out
or write down the information for Wi-Fi settings. Click Save to implement the
changes and continue.
4. The AP is saving the settings.
