TRENDnet TEW-734GR, User Manual

Page: 39 / 60

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-734GR
36
1. Log into your router management page (see “Access your router management page”
on
page 26 ).
2. Click on Access , and click on Special AP .
To simplify configuration, there is a list of commonly used pre-defined special
application entries to modify, otherwise, you can choose to manually add a new special
application.
3. Review the special application settings.
•
Enabled – Selecting Enabled turns on the special application and selecting
Disabled
turns it off.
•
Name – Enter a name for the special application.
•
Trigger – Port or port range requested by the device.
o
Protocol – Select the protocol requested by the device. TCP, UDP , or you
can select
Both
to choose both TCP and
UDP.
o
Port Range – Enter the ports or port range requested by the device.
(e.g. 554-554 or 6112-6112).
Note: Please refer to the device documentation to determine which ports and protocols
are required.
•
Incoming – Port(s) forwarded to the device.
o
Protocol – Select the protocol to be forwarded to the device. TCP,
UDP , or you can select Both to choose both TCP and UDP.
o
Port Range – Enter the ports or port range to be forwarded to the
device.
(e.g. 2000-2038,2069,2081,2200-2210).
Note: Please refer to the device documentation to determine which ports and
protocols are required.
•
Add – Saves a new special application.
•
To modify an existing application, click on the entry in the special applications list. When
selected, the entry will be highlighted.
•
Delete – Removes an existing special application.
•
Update – Modifies an existing special application.
•
Cancel
– Discard changes to an existing special application.