z
nrt-VBR (non-real-time Variable Bit Rate):
When nrt-VBR is selected,
the SCR and MBS fields are enabled.
z
rt-VBR (real-time Variable Bit Rate):
When rt-VBR is selected, the SCR
and MBS fields are enabled.
PCR:
Peak Cell Rate, measured in cells/sec., is the cell rate which the source may
never exceed.
CDVT:
Cell Delay Variation Tolerance, is a QoS parameter in ATM network for
managing traffic that is specified when a connection is set up. In CBR
transmissions, CDVT determines the level of jitter that is tolerable for the data
samples taken by the PCR.
SCR:
Sustained Cell Rate, measured in cells/sec., is the average cell rate over the
duration of the connection.
MBS:
Maximum Burst Size, a traffic parameter that specifies the maximum
number of cells that can be transmitted at the peak cell rate.
Apply Changes:
Click to set new PVC QoS mode for the selected PVC. New
parameters will take effect after save into flash memory and reboot the system.
Undo:
Discard your settings.
ADSL Settings
The ADSL setting page allows you to select any combination of DSL training
modes.
65
Summary of Contents for TEW-436BRM
Page 1: ...i ...
Page 28: ...Click next button to save configuration and reboot the WLAN ADSL Router 22 ...
Page 91: ...85 ...
