TRENDnet TEW-436BRM, User Manual

Page: 70 / 91

WAN:
Checked the services on the WAN column to allows the services access
from WAN side.
WAN Port:
This field allows the user to specify the port of the corresponding
service. Take the HTTP service for example; when it is changed to 8080, the HTTP
server address for the WAN side is http://dsl_addr:8080, where the dsl_addr is the
WAN side IP address of the WLAN ADSL Router.
ATM Settings
This page is used to configure the parameters for the ATM of your ADSL Router.
Here you may change the setting for VPI, VCI, QoS etc.
VPI:
Virtual Path Identifier. This is read-only field and is selected on the Select
column in the Current ATM VC Table.
VCI:
Virtual Channel Identifier. This is read-only field and is selected on the Select
column in the Current ATM VC Table. The VCI, together with VPI, is used to
identify the next destination of a cell as it passes through to the ATM switch.
QoS:
Quality of Server, a characteristic of data transmission that measures how
accurately and how quickly a message or data is transferred from a source host to a
destination host over a network. The four QoS options are:
z
UBR (Unspecified Bit Rate):
When UBR is selected, the SCR and MBS
fields are disabled.
z
CBR (Constant Bit Rate):
When CBR is selected, the SCR and MBS
fields are disabled.
64